Leave-in protection against corrosion and limescale

Sentinel X100 Inhibitor provides protection for clean central heating systems against limescale and corrosion. Suitable for use in all types of indirect central heating system, Sentinel X100 Inhibitor will extend the life of the system, ensuring maximum efficiency and minimising fuel usage.

Key features

  • Heavy duty inhibitor
  • Protects against limescale and corrosion
  • Energy Saving Trust Recommended
  • TripleTech™ Anti-Corrosion Technology
  • Suitable for all system metals
  • pH neutral formulation
  • Ensures optimum system efficiency
  • Suitable for hard, soft and artificially softened water
  • Helps prevent the formation of hydrogen gas
  • A simple test kit is available to check levels

RAPID-DOSE®

Designed to make dosing in to the system quicker than ever.

300ml

Product Fact Sheet Safety Data Sheet

400ml (discontinued)

Product Fact Sheet Safety Data Sheet

 

Features and Benefits

  • Quickest dosing means less time on the job
  • No need to drain or depressurise the system*
  • Adaptor included for application into Sentinel Eliminator®, radiator or boiler filling loop

More information about Rapid-Dose and how to dose is available here.

*It is only necessary to release system pressure when it is above 2.3 bar.

 

Limescale and corrosion are the two main causes of central heating inefficiency, leading to radiator cold spots, boiler inefficiency, a noisy system and a multitude of other problems. Once a system has been prepared using one of the cleaners from the Sentinel cleaning range, it should be protected with Sentinel X100 Inhibitor to prevent the occurrence of limescale build up or corrosion.

Sentinel X100 Inhibitor has TripleTech™ Anti-Corrosion Technology, a unique blend of heavy-duty specialist corrosion inhibitors. Since central heating systems are normally made up of a variety of metals, each of these specialist inhibitors provides protection for different metals for unrivalled performance in protecting multi-metal central heating systems.

1 litre, 1 300ml aerosol 400ml aerosol, or 1 275ml tube of Sentinel X100 Inhibitor is sufficient to treat a typical domestic system of up to 10 radiators. Larger systems should be dosed with twice this amount.

Open Systems: Dose via F&E cistern, via a by-pass feeder or use a Sentinel Dosing Vessel.

When using concentrate gel, add directly to the heating system either via a radiator air bleed valve, or via the fill loop using the appropriate adaptor and a suitable caulk gun.

Sealed Systems: If the system is empty, add to any convenient point before filling. If full, use a Sentinel Dosing Vessel to inject via the filling loop or other access point.

When using concentrate gel, add directly to the heating system either via a radiator air bleed valve, or via the fill loop using the appropriate adaptor and a suitable caulk gun.

FAQs